MALLINCKRODT BAKER INC -- ALUMINUM AMMONIUM SULFATE, 3212 -- 6810-00N093050
===================== Product Identification ===================== Product ID:ALUMINUM AMMONIUM SULFATE, 3212 MSDS Date:12/08/1996 FSC:6810 NIIN:00N093050 Status Code:A === Responsible Party === Company Name:MALLINCKRODT BAKER INC Address:222 RED SCHOOL LANE City:PHILLIPSBURG State:NJ ZIP:08865 Country:US Info Phone Num:800-582-2537 Emergency Phone Num:202-463-7616 Resp. Party Other MSDS Num.:A2760 Chemtrec Ind/Phone:(800)424-9300 CAGE:70829 === Contractor Identification === Company Name:MALLINCKRODT BAKER, INC. Address:222 RED SCHOOL LANE Box:City:PHILLIPSBURG State:NJ ZIP:08865 Country:US Phone:800-582-2537 CAGE:70829 ============= Composition/Information on Ingredients ============= Ingred Name:SULFURIC ACID, ALUMINUM AMMONIUM SALT (2:1:1) CAS:7784-25-0 Minumum % Wt:98. Maxumum % Wt:100. ===================== Hazards Identification ===================== Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:WARNING! HARMFUL IF SWALLOWED OR INHALED. CAUSES IRRITATION TO SKIN, EYES & RESPIRATORY TRACT. POTENTIAL HEALTH EFFECTS: THIS MATERIAL HYDROLYZES IN WATER TO FORM SULFURIC ACID, WHICH IS RESPONSIBLE FOR IRRITATING EFFECTS GIVEN BELOW. ACUTE: INHAL: CAUSES IRRITATION TO RESPIRATORY TRACT. SYMPTOMS MAY INCLUDE COUGHING, SHORTNESS OF BREATH. INGESTION: CAUSES IRRITATION TO THE GASTROINTESTINAL TRACT . SYMPTOMS MAY INCLUDE NAUSEA, VOMITING AND DIARRHEA. THERE HAVE BEEN TWO CASES OF FATAL HUMAN POISONINGS FROM INGESTION OF 30 GRAMS OF ALUM. SKIN: CAUSE IRRITATION TO SKIN. SYMPTOMS INCLUDE REDNESS, ITCHING, & PAIN. (EFTS OF OVEREXP). Effects of Overexposure:HLTH HAZ: EYE CONTACT: CAUSES IRRITATION, REDNESS, AND PAIN. CHRONIC: NO INFORMATION FOUND. Medical Cond Aggravated by Exposure:NO INFORMATION FOUND. ======================= First Aid Measures ======================= First Aid:INHALATION: REMOVE TO FRESH AIR. IF NOT BREATHING, GIVE ARTIFICIAL RESPIRATION. IF BREATHING IS DIFFICULT, GIVE OXYGEN. GET MEDICAL ATTENTION. INGEST: IF SWALLOWED, DO NOT INDUCE VOMIT. GIVE LARGE QUA NTITIES OF WATER. NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON. GET MED ATTN IMMED. SKIN: WIPE OFF EXCESS MATERIAL FROM SKIN THEN IMMEDIATELY FLUSH SKIN W/PLENTY OF WATER FOR AT LEAST 15 MIN. REMOVE CONTAMINATED CLOTHING & SHOES. GET MEDICAL ATTENTION. WASH CLOTHING BEFORE REUSE. THOROUGHLY CLEAN SHOES BEFORE REUSE. EYE: IMMED FLUSH W/PLENTY OF H*2O FOR AT LEAST 15 MIN, LIFTING UPPER & LO WER EYELIDS OCCASIONALLY. GET MED ATTN. ===================== Fire Fighting Measures ===================== Extinguishing Media:USE ANY MEANS SUITABLE FOR EXTINGUISHING SURROUNDING FIRE. KEEP IN MIND THAT ADDITION OF WATER CAN CAUSE THE FORMATION OF SULFURIC ACID. Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE EQUIPMENT . Unusual Fire/Explosion Hazard:EXPLOSION: NOT CONSIDERED TO BE AN EXPLOSION HAZARD SEALED CONTAINERS MAY RUPTURE WHEN HEATED. FIRE: NOT CONSIDERED TO BE A FIRE HAZARD. MAY RELEASE FLAMMABLE AMMONIA IF INVOLVED IN A FIRE. ================== Accidental Release Measures ================== Spill Release Procedures:COVER SPILL WITH SODIUM BICARBONATE OR SODA ASH AND MIX. VENTILATE AREA OF LEAK OR SPILL. KEEP UNNECESSARY AND UNPROTECTED PEOPLE AWAY FROM AREA OF SPILL. WEAR APPROPRIATE PERSONAL PROTECTIVE EQUIPMEN T AS SPECIFIED IN SECTION 8. SPILLS: PICK UP AND PLACE IN A SUITABLE CONTAINER FOR RECLAMATION OR DISPOSAL, USING A METHOD THAT DOES NOT GENERATE DUST. ====================== Handling and Storage ====================== Handling and Storage Precautions:KEEP IN TIGHTLY CLOSED CONTAINER, STORED IN COOL, DRY, VENT AREA. PROTECT AGAINST PHYSICAL DAMAGE. ISOLATE FROM INCOMPATIBLE SUBSTANCES. CONTAINERS OF THIS MATERIAL MAY BE HAZARDOUS WHEN EMPTY SINCE T HEY RETAIN PRODUCT RESIDUES (DUST, SOLIDS); OBSERVE ALL WARNINGS & PRECAUTIONS LISTED FOR PRODUCT. Other Precautions:RESP PROT: WHICHEVER IS LOWEST. FOR EMERGENCIES OR INSTANCES WHERE THE EXPOSURE LEVELS ARE NOT KNOWN, USE NIOSH APPRVD FULL-FACEPIECE POSITIVE-PRESSURE, AIR SUPPLIED RESPIRATOR. WARNING: NIOSH APPROV ED AIR-PURIFYING RESPIRATORS DO NOT PROTECT WORKERS IN OXYGEN-DEFICIENT ATMOSPHERES. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:IF EXPOS LIMIT IS EXCEEDED, NIOSH APPRVD HALF-FACE DUST/MIST RESP MAY BE WORN FOR UP TO TEN TIMES EXPOS LIMIT/MAXIMUM USE CONC SPECIFIED BY APPROP REGULATORY AGENY/RESP SUPPLIER, WHICHEVER IS LOWEST. NIOSH FULL-FACE PIECE DUST/MIST RESP MAY BE WORN UP TO 50 TIMES EXPOS LIMIT/MAX USE CONC SPECIFIED BY APPROP REGULATORY AGENCY/RESP SUPPLIER, (OTHER PREC) Ventilation:SYS OF LOC &/GEN EXHST IS REC TO KEEP EMPLOYEE EXPOS BELOW AIRBORNE EXPOS LIMITS. LOC EXHST VENT IS GENERALLY PREFERRED BECAUSE IT CAN CONTROL (SUPDAT) Protective Gloves:IMPERVIOUS GLOVES. Eye Protection:ANSI APPROVED CHEMICAL WORKERS GOGGLES . Other Protective Equipment:EYE WASH & DELUGE SHOWER MEETING ANSI DESIGN CRITERIA . WEAR IMPERVIOUS PROTECTIVE CLOTHING, INCLUDING BOOTS, LAB COAT, APRON OR COVERALLS, AS APPROPRIATE, TO PREVENT SKIN CONTACT. Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING. Supplemental Safety and Health VENT: EMISSIONS OF CONTAM AT ITS SOURCE, PREVENTING DISPERSION OF IT INTO GENERAL WORK AREA. PLEASE REFER TO ACGIH DOCUMENT, INDUSTRIAL VENT, MANUAL OF REC PRACTICES MOST RECENT EDITIONS FOR DETAILS. ================== Physical/Chemical Properties ================== Boiling Pt:=280.C, 536.F B.P. Text:DECOMPOSES Melt/Freeze Pt:=94.5C, 202.1F Vapor Pres:OTHER INFO Vapor Density:OTHER INFO pH:OTHER INFO Evaporation Rate & Reference:NO INFORMATION FOUND Solubility in Water:OTHER INFO Appearance and Odor:COLORLESS CRYSTALS; ODORLESS. Percent Volatiles by Volume:OTHER INFO ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES CONTACT WITH ALKALIS MAY RELEASE AMMONIA GAS. CORROSIVE TO METALS IN THE PRESENCE OF WATER. Stability Condition to Avoid:MOISTURE AND INCOMPATIBLES. Hazardous Decomposition Products:TOXIC OXIDES OF NITROGEN, SULFUR DIOXIDE, AMMONIA, AND SULFUR TRIOXIDE MAY FORM AT ELEVATED TEMPERATURES. HYDROLYZES TO FORM SULFURIC ACID. Conditions to Avoid Polymerization:WILL NOT OCCUR. =================== Toxicological Information =================== Toxicological Information:NO LD50/LC50 INFORMATION FOUND RELATING TO NORMAL ROUTES OF OCCUPATIONAL EXPOSURE. ===================== Ecological Information ===================== Ecological:ENVIRONMENTAL FATE: NO INFORMATION FOUND. ENVIRONMENTAL TOXICITY: NO INFORMATION FOUND. ==================== Disposal Considerations ==================== Waste Disposal Methods:WHATEVER CANNOT BE SAVED FOR RECOVERY/RECYCLING SHOULD BE MANAGED IN APPROP & APROVED WASTE DISPOSAL FACILITY. PROCESSING, USE/CONTAMINATION OF THIS PRODUCT MAY CHANGE WASTE MANAGEMENT OPTIONS. STATE & LOCAL DISPOSAL REGULATIONS MAY DIFFER FROM FED DISPOSAL REGULATIONS. DISPOSE OF CONTAINER & UNUSE D CONTENTS I/A/W/FED, STATE & LOCAL REQUIREMENTS. =================== MSDS Transport Information =================== Transport Information:NOT REGULATED. ===================== Regulatory Information ===================== SARA Title III Information:FEDERAL, STATE & INTERNATIONAL REGULATIONS - PART I: INGREDIENT: SULFURIC ACID, ALUMINUM AMMONIUM SALT: (2:1:1) (7784-25-0): SARA 302: RQ NO; TPQ: NO. SARA 312: LIST NO CHEMICAL CATG: NO. Federal Regulatory Information:CHEMICAL INVENTORY STATUS- PART 1: INGREDIENT: SULFURIC ACID, ALUMINUM AMMONIUM SALT (2:1:1) (7784-25-0): TSCA; EC; JAPAN; AUSTRALIA: YES. CHEMICAL INVENTORY STATUS - PART 2: INGREDIENT: SULFUR ACID, ALUMINUM AMMONIUM SALT (2:1:1) (7784-25-0): CANADA: KOREA: YES, DSL: YES; NDSL: NO; PHIL: NO. AUSTRALIAN HAZCHEM CODE: NO INFORMATION FOUND. POISON SCHEDULE: NO INFORMATION FOUND. WHMIS: THIS MSDS HA S BEEN PREPARED ACCORDING TO THE HAZARD CRITERIA OF THE CONTROLLED PRODUCTS REGULATIONS (CPR) AND MS DS CONTAINS ALL OF THE INFORMATION REQUIRED BY THE CPR. ======================= Other Information ======================= Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.